Zhuzhou Jiabang Refractory Metal Co., Ltd
5 1

Tungsten Carbide Rod And Plate Tungsten Carbide Products Good Strength And Tenacity

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

Zhuzhou Jiabang Refractory Metal Co., Ltd
[China]

Address
No.5 Building, No.581 Heilong Jiang Road, Li Yu Industrial Park, Tian Yuan District, Zhuzhou, Hunan, Zhuzhou Hunan
Phone
86-0733-28410199
Contact name
Xu

Quick Information

  • Brand Name: JBNR
  • Place of Origin: China
  • Model Number : customization as requirements

Description

Tungsten Carbide Rod and Plate

Featuring high hardness, wear resistance, good strength and tenacity, heat resistance and corrosion resistance, tungsten carbide remains its original appearance under 500 (even under 1000).

Description
 

Featuring high hardness, wear resistance, good strength and tenacity, heat resistance and corrosion resistance, tungsten carbide remains its original appearance under 500 (even under 1000).

Thus tungsten carbide rods and plates as well as tungsten carbide boring bars are widely applied in mechanical processing.

 

1. Introduction of Tungsten Carbide Plate
 

Characterizing good durability and shock resistance, it is often used as stamping die.

This kind of plate is widely utilized in electronics industry such as the motor rotor, stator, LED lead frame, EI silicon steel sheet, etc.
 

2. Introduction of Tungsten Carbide Rod
 

All rods are supplied with standard lengths of 310 mm or 330 mm.

Custom lengths are available.
Those rods can be used for manufacturing bit, automotive tools, printed circuit board, cutting tools, vertical milling cutter, reamer, whole carving knife, etc., at the same time, it can make punch, mandrel and punch tool.

 

Properties and Applications of Tungsten Carbide Plate

Grade Density
g/cm³
T.R.S
MPa
Hardness
HRA
Performance & Application Recommended Approx
Grades in
China
MK6A 14.9 1860 92.0 Fine grade alloy with good wear resistance; used for processing blades, wear resistance parts, etc. YG6A
MK8 14.7 2320 89.5 High bending strength and wear resistance lower than MK6A; used for processing blades, wear resistance parts, etc. YG8
MK15 14.0 2500 87.5 Used for punch dies, stamping dies and wears resistance parts. YG15
MG20 13.5 2800 85.5 High bending strength; used for step dies and other stamping dies. YG20

Specifications of Tungsten Carbide Plate

Thickness Width[1] Length
1.5-2.0 150 200
2.0-3.0 200 250
3.0-4.0 250 600
4.0-6.0 300 600
6.0-8.0 300 800
8.0-10.0 300 750
10.0-14.0 200 650
>14.0 200 500

Dimensions of Tungsten Carbide Rod

D (mm) Tolerance h6 (mm) Length (mm) Tolerance
2.20 +0.20
+0.30
2.00 330
+2.0
-0
3.20 3.00 330
4.20 4.00 330
5.20 5.00 330
6.20 6.00 330
7.20 7.00 330
8.20 8.00 330
9.20 9.00 330
10.20 10.00 330
11.20 11.00 330
12.20 12.00 330
13.30 +0.30
+0.40
13.00 330
14.30 14.00 330
15.30 15.00 330
16.30 16.00 330
17.30 17.00 330
18.30 18.00 330
19.30 19.00 330
20.30 20.00 330
21.30 21.00 330
22.30 22.00 330
23.30 23.00 330
24.30 24.00 330
25.30 25.00 330

h6/h7 ISO Standard Tolerance

Diameter h6 h7
0~3.0 mm +0 / -0.006 mm +0 / -0.010 mm
3.001~6.0 mm +0 / -0.008 mm +0 / -0.012 mm
6.001~10.0 mm +0 / -0.009 mm +0 / -0.015 mm
10.001~18.0 mm +0 / -0.011 mm +0 / -0.018 mm
18.001~30.0 mm +0 / -0.013 mm +0 / -0.021 mm

 

Package and Transportation
We pack tungsten carbide rod and tungsten carbide plate in plywood case and send them by ocean or air.


Product Image

  • Tungsten Carbide Rod And Plate Tungsten Carbide Products Good Strength And Tenacity image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Xu
Zhuzhou Jiabang Refractory Metal Co., Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Bearings
* Message

Use English only Max. 2000 characters. (Min. 20)

Send